With the development of science and technology increasing constantly, paper cone machine products also received an unprecedented improvement. Superior performance in the first paper cone machine has been more and more, automation, intelligent also received an unprecedented increase, this leads to a lot of people don't know how to correct operation of paper machine, below we Jinan Tongri on how to correct operation of paper cone machine factory for everyone to do a detailed explanation:

  Before using paper tube machinery and equipment, should be detailed to roll of paper machine parts. Must pay attention to the electrical equipment, switches are in good condition, whether the electrical circuit insulation, solid, screw, nut is tight protective device is safe, and in the refueling point filling grease, run idle 1-2 minutes, equipment rear can normal operation.

  Paper cone machine equipment must by special personnel in charge, it is strictly prohibited to others casually misuse. When the roll of paper machine in work, machine tool parts are strictly forbidden to put, card, measuring tool and other sundry, operation staff shall not leave work without authorization. Paper cutting, such as using the ventilation machine, paper cutting, paper tube cutter height can't exceed 125mm, and according to the size requirement, with mei pressure iron binding. Only paper cutting machine tool, can't cut the other plate, two or more persons, should cooperate with each other, work, not reached into weight and blades, to prevent a cut. Such as using a special cutter, not reached into the spindle rotation, to prevent injury. When carries on the edge grinding, attention should be paid to prevent leg into paper axis; adjust machine, pay attention to the emery cloth wheel grinding.

  Most important, paper machine at the time of use must guarantee the equipment normal use of the equipment, not just in order to improve the efficiency, but also in order to ensure the personal safety of operators.