The use of paper cone machine
1, paper mill equipment before use, should check each details, electrical equipment, switches are in good condition, whether the electrical circuit insulation, screw, nut fastening, protective device is safe, and in the refueling point filling grease, run idle 1-2 minutes, equipment rear can normal operation.
2, the equipment must be someone who's in charge of, it is forbidden to others casually misuse. Each part of the machine it is strictly prohibited to put in work, card, measuring tool and other sundry, operation staff shall not leave work without authorization.
3, cut low, such as using the ventilation machine, paper cutting, paper cutting height can't exceed 125 mm, and according to the size requirement, pressure iron binding with positioning. Only paper cutting machine tool, can't cut the other plate, two or more persons, should cooperate with each other, work, not reached into weight and blades, to prevent a cut. Such as using a special cutter, not reached into the spindle rotation, to prevent injury.
4, edge grinding, prevent leg into paper axis; Adjust machine, pay attention to the emery cloth wheel grinding.
- Pre：Prolong the service life of pa 2019/12/9
- Next：Paper cone machine meet the ne 2014/6/8
