Correct installation of paper cone machine
As is known to all, paper cone
machine has been widely applied to all walks of life, got a huge
development, so the paper machine is how to install?Tongri today about paper
machine installation steps for you:
A, install the preparation: paper
tube, paper cone
machine group to prepare
technology, paper and paper tube adhesive supply work.Must be ready to technical
preparation work before construction of the required tools, materials, and
promptly the installed mechanical equipment can be shipped to the site,
unpacking inspection, disassembly, cleaning, lubrication, etc.
Second,
the paper cone
machine equipment out of the examination.Equipment disassembly, cleaning and
lubrication.
1, paper cone machine lubrication.After the various parts of the
equipment inside and outside clean, can only for lubrication.Lubricating oil
must pass a test, determine the requirements before you can use.Join the
equipment lubricating oil must be filtered out, the gas oil standard location
should reach regulation;All part lubrication and oil hole should be filled with
lubricating oil.
2, paper cone
machine cleaning .After removal of equipment out of the examination, to
remove rust and internal coating by residual iron, rust, and accumulation of
dust and other filth in the transport, storage, clean, can be assembled
- Pre：Safe operating machine skills 2020/1/7
- Next：Paper cone machine meet the ne 2014/6/8
