Security in paper cone machine performance
Efficiency is always talked by the enterprises and can't be ignored. High efficiency can bring high benefit, but when we are in the pursuit of efficiency and there is still an indispensable topic the safety in production. All production must be based on security operation, and only security can guarantee benefit.
Then we should pay more attention to what the problem in usage of paper cone machine. A few points for safety that we sum up can't be ignored:
1. Spindle speed must be carried out in the park. The transmission gear should be fully meshed. Should that machine is not normal, it should be immediately stoped and checked.
2. Before cutting, adjusting cutting tool and clamping the work. The clamping part of the length of is not less than 50mm. Parking baffle should be fixed, after clamping, loosen, forward, backward and sequential test it can work.
3. When the machine tool is in the operation, any part of the body can't contact transmission parts. During the operation, tie the cuffs and wear no gloves. The human head should keep away from the direction of cutting.
4. When exchangeing tools, measuring, lubrication and cleaning pipe head, the machine must stop.
5. When cutting pipe head, the pipe head should be prevented flying out to hurt people.
6. No person can stand in the direction of feeding material.
- Pre：rapid change of market, ration 2022/8/30
- Next：Introduction to a few big char 2019/12/2
